Interquartz IQ750 - Manual (Page 25)

25
To program or alter the contents of a protected Direct Access memory:
1. Remove the memory card paper insert below the top row of Direct Access memory
keys to reveal the MEMORY PROTECTION SWITCH
2. Move the MEMORY PROTECTION SWITCH to the “Non-Protected” position as shown
in Figure 4
3. Press STORE; the display will show “STORE”
4. Press the Memory Key either once to store in a One-Touch memory or twice for a
Two-Touch memory; the display will show “ENTER NUMBER”
5. Enter the telephone number and press STORE
6. Enter the name (name of the feature code) by using the Keypad and press STORE
to confirm; the display will show “MEMORY STORED”
7. Move the MEMORY PROTECTION SWITCH to the “Protected” position as shown in
Figure 4
8. Gently press the small RESET key next to the MEMORY PROTECTION SWITCH.
To dial from a Protected Direct Access Memory
Press the desired Memory Key either once to dial from its One-Touch memory or twice
to dial from its Two-Touch memory.
FIGURE 4 MEMORY PROTECTION SWITCH
CALLER
DIRECTORY
STORE CLEAR
TIMER
Reset-
NP P
Non-Protected
Protected