Ringer/message waiting indicator, Ringer volume switch, Ringer pitch control – Interquartz IQ750 User Manual

Page 12: Ringer/message waiting indicator 2, Ringer volume switch 2, Ringer pitch control 2

Advertising
background image

12

RINGER/MESSAGE WAITING INDICATOR

Located at the top right hand side of the telephone above the DISPLAY, the red lense

contains two different indicators; their functions are as follows:

1. Ring Indicator

Flashes when the telephone rings with an

incoming call.

2. PABX Message Waiting Indicator Illuminates when a message is waiting in your

PABX voicemail system (depends on system

compatibility). The built-in Message Waiting

option suits any neon type (minimum 80 VDC)

message waiting system and Ericsson BP250

Message Waiting (other system types are available

as optional extras). To determine which PABX type

your IQ750 has been prepared to suit,

check the telephone’s underside for a label indicating that specific circuitry has been

installed in your unit. If in doubt, contact Interquartz for further details. To retrieve your

message, consult your voice mail system user guide.

IQ750 is also fitted with a message waiting indicator lamp which is compatible with the

voicemail features of Centrex networks (eg. Telstra Customnet) and residential line voicemail

systems (eg. Telstra Home Messages 101 and MessageBank). There are indicators

located in the CALLER Key and display for these services and are described elsewhere

in this manual.

RINGER VOLUME SWITCH

The three available positions allow selection of OFF (no sound), LOW volume, and HIGH

volume of the telephone ringing sound during an incoming call (Figure 2B).

RINGER PITCH CONTROL

The pitch of the ringing sound may be altered by rotating the control to suit your preference

to achieve a distinctive sound, or one that is audible, more distinctive or more pleasant.

Advertising