Inter-Tel ENDPOINT 8690 - Manual (Page 44)

38 Inter-Tel ® Model 8690 User Guide (ITP Mode)
GETTING
ST
ARTED
4. Enable or disable the following options:
• Log to file: Diagnostics are logged to a file stored in the My Computer
folder on the endpoint. This option is ON by default.
NOTE: This file is stored in an area of the file system that will be lost if you
reset the endpoint. If you are asked to provide this file to technical support,
either copy the file off of the device, or copy the file to the Mounted Volume
folder (My Computer\Mounted Volume) before resetting the endpoint.
• Log to telephone system: Diagnostics are logged to a location on the sys-
tem. This option is OFF by default.
• Log extended information: Additional diagnostic information is logged.
This option is usually only enabled when a network administrator needs to
troubleshoot endpoint issues. Enabling this option may affect client applica-
tion performance.
NOTE: Check with your network administrator before changing these fields.
5. Press OK in the upper-right corner of the Options dialog box to save and apply
your selections.
About Tab
The About tab contains read-only and copyright information about your endpoint.
This information includes:
• Model number (Model 8690)
• User Interface Version
• Firmware Version
• Operating System Version