IBM xSeries 330 - Manual (Page 46)

38 Hardware Maintenance Manual: xSeries 330
Note: By default you will have 2 seconds after the prompt appears on the screen
to press Ctrl+S.
3. Use the arrow keys or press Enter to select a choice from the menu.
• Press Esc to return to the previous menu.
• Press the F4 key to exit.
4. Follow the instructions on the screen to change the settings of the selected items;
then, press Enter.
Choices available from the PXE boot agent
utility
The following choices appear on the PXE boot agent utility menu:
• Network Boot Protocol
PXE is the default value for this menu item.
Note: Do not change this value. There are no other network boot protocols
supported.
• Boot Order
Select this choice to change the order in which boot devices are queried.
— Try local drives first, then network (Default)
— Try network only
— Try local drives only
— Try network first, then local drives
• Show setup prompt
Select this choice to either display the PXE setup prompt or disable it. Disable is
the default setting.
When this choice is enabled Press Ctrl+S to enter the setup menu will appear on
the screen under the initializing prompt.
• Setup time wait menu
Select this choice to set up the amount of time (in seconds) that the system will
pause during initialization for a Ctrl+S input.
— 2 seconds (Default)
— 3 seconds
— 5 seconds
— 8 seconds
• Legacy OS wake up support Select this choice to
allow/disallow a non-windows operating system to use adapter remote wake up
capability.
— Disabled (Default)
— Enabled