IBM SC34-6814-04 - Manual (Page 177)

X'04' YEAR was specified on a FORMATTIME command, or
MINUTES was specified.
X'02' TIME was specified on a FORMATTIME command, or
PROTECT was specified.
X'01' TIMESEP was specified on a FORMATTIME command, or
NOCHECK was specified.
IC_EIDOPT7
Indicates whether certain functions or keywords were specified on the
request.
X'F0' CANCEL specified.
X'82' RETRIEVE specified.
X'80' YYYYDD specified on a FORMATTIME command.
X'40' YYYYMMDD specified on a FORMATTIME command, or
START specified.
X'30' POST specified.
X'20' YYYYDDMM specified on a FORMATTIME command, or
DELAY, RTRANSID, RTERMID, or QUEUE specified, and/or
FMH.
X'13' ASKTIME specified.
X'10' DDMMYYYY specified on a FORMATTIME command, or
FROM, RTRANSID, or RTERMID specified, and/or QUEUE.
X'08' MMDDYYYY specified on a FORMATTIME command, or TIME
or WAIT specified.
X'04' FULLDATE specified on a FORMATTIME command, or REQID
specified.
X'01' TERMID specified.
IC_EIDOPT8
Indicates whether certain keywords were specified on the request.
X'80' FOR or AFTER specified.
X'40' AT or UNTIL specified.
X'10' BREXIT specified.
X'08' BRDATA specified.
X'04' BRDATALENGTH specified.
X'02' CHANNEL specified on a START command.
IC_ADDR1
is the address of one of the following:
v An 8-byte area containing the value of the INTERVAL keyword (or TIME
keyword if IC_EIDOPT7 indicates that TIME is specified).
v An 8-byte area containing the value of REQID (if the request is CANCEL).
v An 8-byte area containing the value of the ABSTIME keyword.
v Data returned for INTO (if the request is RETRIEVE, and if IC_EIDOPT5
indicates that this is not SET).
v A 4-byte address returned for SET (if the request is RETRIEVE and
IC_EIDOPT5 indicates that this is SET).
Chapter 1. Global user exit programs 155