IBM SC34-6814-04 - Manual (Page 483)

TIME
This type of threshold testing is supported.
NOTIME
This type of threshold testing is not supported.
PRINT=print-information
specifies which types of information are to be logged to the transient data
destination each time an error occurs. If NOTD is specified on the OPTIONS
operand, all PRINT parameters default to NO. All PRINT parameters require the
transient data output routine. The parentheses are required even when only one
parameter is specified.
ERRORS|NOERRORS
specifies whether unprocessable conditions detected by the sample
DFHTEP are to be recorded on the transient data destination.
ERRORS
Error messages are to be logged.
NOERRORS
No error messages are to be logged.
TACPACTION|NOTACPACTION
specifies whether DFHTACP default actions are to be recorded on the
transient data destination.
TACPACTION
The default actions are logged.
NOTACPACTION
No default actions are logged.
TEPACTION|NOTEPACTION
specifies whether the actions selected as a result of sample DFHTEP
processing are to be recorded on the transient data destination.
TEPACTION
The final actions are logged.
NOTEPACTION
No final actions are logged.
TID|NOTID
specifies whether the symbolic terminal ID of the terminal associated with
an error is to be recorded on the transient data destination.
TID
The terminal ID is to be logged.
NOTID
No terminal IDs are to be logged.
DECB|NODECB
specifies whether the DECB of the line associated with error is to be
recorded on the transient data destination.
DECB
The DECB is logged. The hexadecimal representation of the DECB is
logged as two 24-byte messages.
NODECB
No DECB logging occurs.
Chapter 8. Writing a terminal error program 461