Presetting fm/am radio stations, Tuning in a radio station – Integra DTR-7 User Manual
Page 24
24
DOWN TUNING UP
1
2
Presetting FM/AM radio stations
Tuning in a radio station
1. Press the FM or AM button.
2. Use the TUNING UP/DOWN buttons to change the fre-
quency.
UP................the frequency increases.
DOWN........ the frequency decreases.
• The frequency changes in 50 kHz steps in FM and 10 kHz in
AM each time you press the TUNING UP/DOWN button.
• In FM, if this button is held continuously for more than 0.5 sec-
onds,the frequencies are scanned automatically (FM auto tuning
mode).
When a broadcast is received, scanning stops.
Listening to a stereo radio station (FM mode)
When you tune in a stereo FM station, the FM STEREO indicator
lights up if the signal is sufficiently strong.
If the signal is weak, it may be impossible to tune in to the desired
station. In this case, tune in as follows.
Press the FM MUTE/MODE button. The AUTO indicator
turns off. At this time, the station will be in mono and interstation
noise will be heard. Select the station to which you want to listen.
FM MUTE/
MODE
DISPLAY
FM
AM
SPEAKERS
A
DSP
AUTO
TUNED
FM
DISPLAY button
Pressing the DISPLAY button each time will change the indication
as follows:
Frequency (preset No.)
Listening mode
MASTER VOLUME
STANDBY/ON
PHONES
VIDEO
AUDIO
L
R
S VIDEO
POWER
OFF
ON
A SPEAKERS B
FM
AM
PHONO
C D
TAPE
VIDEO-1
DVD
VIDEO-4
VIDEO-3
VIDEO-2
D
O
W
N
U
P
FM MUTE/
MODE
CHARACTER/
MEMORY
SP/SYS
SETUP
SMART SCAN
CONTROLLER
MODE
AUDIO
ADJUSTMENT
BASS/
TREBLE
DISPLAY
DSP
PRESET/MODE ADJ
PUSH TO ENTER
DOWN TUNING UP
THX
/DTS
SURROUND
MODE
LISTENING MODE
STEREO
DIRECT
DIGITAL/
ANALOG
CH LEVEL
DIMMER
TI CH
MUL
INPUT
ANDBY
ST
TI SOURCE
MUL
DTR -
7
by
VIDEO4
(MONO)
AUDIO
L
R
REC OUT /
MULTI SOURCE
FM/AM
TUNING UP/DOWN
FM MUTE/MODE
CHARACTER/MEMORY
SMART SCAN
CONTROLLER
SPEAKERS
A
SPEAKERS
A