Intel ZT8101 - Manual (Page 112)

112 ZT8101 Users Guide
Using the Web Console
VLAN Configurations
The switch allows the assignment of an IP interface to each VLAN. A VLAN must be configured
before setting up its IP interface. You can create either a port-based or an IEEE 802.1Q VLAN. By
default, all ports belong to an IEEE 802.1Q VLAN called “default.” Although this VLAN cannot
be deleted, all member ports can be assigned to other VLANs.
To configure GVRP globally
The global GVRP flag determines whether GVRP (Group VLAN Registration Protocol) is enabled
on the switch so that the switch can share VLAN information with other switches, and VLANs can
span multiple switches. When this flag is disabled, VLANs are confined to the physical
connections of the switch. By default, this flag is disabled.
1. In the left panel, click VLAN Configurations.
2. In the top panel, click Switch GVRP.
3. Use the drop-down menu to select Enabled or Disabled.
4. Click Apply.
To configure a port-based VLAN
Ports must be removed from another VLAN before they are available for assigning as static
members of a port-based VLAN.
1. In the left panel, click VLAN Configurations.
2. In the top panel, click Port-Based VLANs.
3. Click New and configure these fields.
4. Click Apply.
5. To modify a VLAN, select it from the list and click Edit.
To configure an 802.1Q VLAN
1. In the left panel, click VLAN Configurations.
2. In the top panel, click 802.1Q VLANs.
3. Click New and configure these fields.
Field Description
VLAN Name
Specifies the name of the VLAN for which ports are to be configured. The
name can be up to 32 characters. Once created, a VLAN name cannot be
modified.
Port Member
Specifies which ports are static members of the VLAN. Click a port’s check
box to add a port to the VLAN.
Field Description
VLAN ID (VID) Specifies an identifier for the VLAN. Enter a number from 2—4094.