Intel ZT8101 - Manual (Page 86)

86 ZT8101 Users Guide
Using the Web Console
The table summarizes the Admin and User privileges:
After establishing a User Account with Admin-level privileges, highlight Save Changes and press
Enter. The switch will save any changes to its non-volatile RAM. You can now log in as that user
and continue configuring the switch.
Saving Changes
The ZT8101 has two levels of memory; normal RAM and non-volatile or NV-RAM. Configuration
changes are made effective when you click the Apply button. When you do this, the settings are
immediately applied to the switching software in RAM and immediately take effect.
Some settings, though, require you to restart the switch before they will take effect. Restarting the
switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is
necessary to save all setting changes to NV-RAM before rebooting the switch.
To retain any configuration changes permanently
1. In the left panel, click Save Changes.
2. Click Save Configuration.
A message appears verifying that your new settings have been saved to NV-RAM.
Once the switch configuration settings have been saved to NV-RAM, they become the default
settings for the switch. These settings will be used every time the switch is rebooted. You can use
the Factory Reset option to return the switch to its factory configured settings.
Admin User
Switch Configuration Management
Configuration Yes Read Only
Network Monitoring Yes Read Only
SNMP Community Strings and Trap Stations Yes Read Only
Update Firmware and Configuration Files Yes No
Switch Utilities Yes
Ping; Read Only access
to BOOTP/DHCP Relay
and DNS Relay.
Factory Reset Yes No
Reboot Switch Yes No
Advanced Setup Yes Read Only
User Account Management
Add/Update/Delete User Accounts Yes No
View User Accounts Yes No