Intel ZT8101 - Manual (Page 60)

60 ZT8101 User’s Guide
Using the Telnet Console
The following information is displayed for each MAC address.
4. To clear all entries and force the switch to rebuild the table, highlight CLEAR ALL and press
Enter. If you have selected to browse by port, you will have the option of clearing all the
entries for the specified port.
To view the IP address table
1. From the Main Menu, select Network Monitoring | IP Address Table and press Enter.
2. To find a particular IP address, enter the IP address in the Jump to IP Address field, highlight
FIND, and press Enter. To find all IP address known by the switch, enter 0.0.0.0 for the IP
address.
The following information is displayed about each IP address.
To view the routing table
1. From the Main Menu, select Network Monitoring | Routing Table and press Enter.
2. To find a particular IP address, enter the following in the appropriate fields: the IP address, the
subnet mask, and the gateway. Highlight FIND, and press Enter.
The following information is displayed in the table.
Column Description
VID The VLAN ID of the VLAN the port is a member of.
VLAN Name The name of the VLAN.
MAC Address The MAC address.
Port
The port corresponding to this MAC address. CPU is used to identify the
MAC address for the switch.
Type
How the switch discovered the MAC address. The possible entries are
Dynamic, Self, and Static. Self is used to identify the MAC address for the
switch.
Column Description
Interface The name of the IP interface corresponding to the IP address.
IP Address The IP address corresponding to the IP interface name.
Port The port the IP address is associated with.
Learned The method the switch used to discover the IP address, either Dynamic or Static.
Column Description
IP Address The IP address corresponding to the subnet mask and gateway.
Subnet Mask The subnet mask corresponding to the IP address.
Gateway The gateway used to reach the IP address.
Interface Name The IP interface name corresponding to the IP address.
Hops The number of hops (routers) between the switch and the IP address.
Protocol The routing protocol used to link the switch to the IP address.