Icom IC-R1500 - Manual (Page 18)

13
4
BASIC OPERATION
■
AFC function [
The AFC (Automatic Frequency Control) function tunes the
displayed frequency automatically when an off-center fre-
quency is received. It activates in FM mode and only when
the selected IF filter is 6 kHz or 15 kHz.
q Select FM mode.
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [S.MW•MW] several times until
“AFC” appears.
r Rotate [DIAL] to toggle the AFC function ON and OFF.
t Push [TS•MODE] or any key below the display to exit set
mode.
• “AFC” appears when the AFC function is in use.
■
VSC function [
The VSC (Voice Squelch Control) function opens the squelch
only when receiving a modulated signal. This function is very
useful while scanning, the VSC pauses only when modulated
signals are received. Scanning continues when unmodulated
or beat signals are received.
q Push [SET•LOCK] to enter set mode.
w Push [SET•LOCK] or [S.MW•MW] several times until
“VSC” appears.
e Rotate [DIAL] to toggle the VSC function ON and OFF.
r Push [TS•MODE] or any key below the display to exit set
mode.
“VSC” appears
[DIAL]
[S.MW•MW]
[SET•LOCK]
Appears
[DIAL]
[S.MW•MW]
[SET•LOCK]