Icom IC-R1500 - Manual (Page 29)

24
5
MEMORY OPERATION
5
e Push [TS•MODE] once to select “bAnk.”
• The bank’s indicator and bank channel are displayed.
r Rotate [DIAL] to select the desired bank indicator to trans-
fer or erase.
• Push [SET•LOCK] to toggle the bank or bank channel selection.
• Select “-- --” indication when erasing the contents from the bank.
• Vacant bank channel numbers are only be displayed.
t Push and hold [S.MW•MW] for 1 sec. to program the bank
and exit select memory write mode.
y Repeat steps q to t for transferring or erasing an another
bank’s contents.
[S.MW•MW]
Bank selection Bank channel selection
[TS•MODE]
After [TS•MODE]
released