Icom IC-R1500 - Manual (Page 51)

46
10
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Cloning allows you to quickly and easily transfer the pro-
grammed contents from a personal computer to a receiver
using the IC-PCR1500 control software.
D Cloning using a personal computer
Data can be cloned to and from a personal computer (Mi-
crosoft
® Windows ® XP/2000/Me/98SE) and other setting can
also be programmed from a PC. Consult the IC-PCR1500/IC-
PCR2500’s Instruction manual for cloning details.
D Available functions
➥
Reading or writing Clone data
➥ Programming memory channels/memory banks/scan
edges
➥
Programming set mode settings
➥
Transferring the data of PC (PCR1500) to receiver (R1500)
or receiver (R1500) to PC (PCR1500)
➥ Automatic mode settings
• The automatic mode setting automatically sets the receive
mode, IF filter passband width, tuning step, etc. after inputting
frequency ranges.
➥
Skip area settings
• The skip area setting is available for skipping unwanted fre-
quency ranges that inconveniently stop scanning.
Main unit
to ground
PC
to USB port
USB cable
to AC adapter
■
DATA cloning
(IC-PCR1500 control software must be installed)
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.