John Deere GT2554 - Manual (Page 19)

Operating - 15
OPERATING
Testing Park Brake
MX13483
1. Lock park brake (A).
2. Pull out free-wheeling lever.
3. Try to push machine manually.
Result: Park brake must prevent machine from moving. If
machine moves, parking brake needs to be adjusted.
Testing Reverse Implement Option (RIO)
Switch
1. Start engine.
2. Engage PTO to start attachment.
3. Look behind machine to be sure there are no
bystanders.
4. Begin reverse travel by depressing reverse foot pedal.
Result: Attachment and engine should stop operation. If
attachment or engine continues to operate while machine
travels in reverse, do not continue to operate attachment.
See John Deere dealer for service.
Using Park Brake
Locking Park Brake:
MX13483
1. Push brake pedal (A) completely down.
2. Lift park brake lever (B) up.
3. Release pedal and park brake lever. Pedal should stay
down and park brake lever should stay locked in up
position.
Unlocking Park Brake:
1. Push and hold brake pedal (B) down.
2. Push park brake lever (A) down to unlock park brake.
3. Release pedal.
Using Headlights
MX13482
Push right side of light switch (A) to turn headlights on.
Push left side of light switch to turn headlights off.
c
CAUTION: Avoid injury! Before moving
rearward, make sure area is clear of
bystanders, especially children.
A
c
CAUTION: Avoid injury! Always lock park brake
before getting off machine or leaving machine
unattended.
A
B
A