Using front weights, Using rear wheel weights, Using tire chains – John Deere GT2554 User Manual

Page 24: Transporting machine on trailer, Operating

Advertising
background image

Operating - 20

OPERATING

NOTE: If engine and attachment stop while
repositioning machine, return PTO knob to off position
and restart machine. (See Starting Engine in this
section.) Begin again with Step 2.

4. As machine begins to move backward, release PTO
knob and reposition machine.

5. Resume forward travel. Attachment should continue
operating.

6. Repeat Steps 1 through 5 to reposition machine again.

Using Front Weights

NOTE: Before installing wheel weights on machine,
make sure that tire valve stems are facing inside.

Install front wheel weights for better stability and steering
control when using equipment such as rear-mounted grass
bagger or dumpcart.

Remove front wheel weights when not required.

Using Rear Wheel Weights

Use of rear wheel weights is recommended when an
attachment, such as snowthrower or blade is used.

Using Tire Chains

Tire chains are recommended for use with snowthrower
and, under certain conditions; front blade.

See your Authorized Service Center for tire chains.

Transporting Machine on Trailer

Be sure trailer has all the necessary lights and signs
required by law.

1. Drive forward onto heavy-duty trailer.

2. Lower mower to trailer deck.

3. Lock park brake.

4. Machines with fuel shut-off: Turn fuel shut-off to off
position.

5. Fasten machine to trailer with heavy-duty straps, chains,
or cables. Both front and rear straps must be directed down
and outward from machine.

6. Strap down hood.

c

CAUTION: Avoid injury! Machine front wheel

weights improve stability in most slope
operation.

Add front wheel weights for better front-end
stability and steering when using a rear
mounted attachment or pulling a cart.

IMPORTANT: Avoid damage! When adding weight to
rear of machine, use wheel weights only, a maximum
of 34 kg (75 lb) for each wheel.

c

CAUTION: Avoid injury! Use extra care when

loading or unloading the machine into a trailer
or truck.

IMPORTANT: Avoid damage! Transmission damage
may occur if the machine is towed or moved
incorrectly:

Move machine by hand only.

Do not use another vehicle to move unit.

Do not tow unit.

Advertising