JVC SR-VS30EK - Manual (Page 18)

Filename [SR-VS30EK_1a-EN.fm]
Masterpage:Left
18
Page 18 February 1, 2002 1:49 pm
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
A
Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B
Access the Main Menu screen on the
recorder.
Press MENU.
C
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SET”, then press OK or e .
D
Access the Sat Control Set screen.
E
Enter the satellite receiver’s brand.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Turn on the TV and select the AV mode.
Press rt to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press OK or
e .
Press the appropriate number
keys to enter the brand code
from the list on page 19, then
press OK.
● If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
● If the recorder is in playback or
recording mode, you cannot
set the brand code.
SR-VS30EK_1.book Page 18 Friday, February 1, 2002 1:50 PM