JVC SR-VS30EK - Manual (Page 38)

Filename [SR-VS30EK_2-EN.fm]
Masterpage:Left
38
Page 38 January 25, 2002 6:29 pm
TIMER RECORDING (cont.)
Express Timer
Programming
If you do not know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
A
Turn on the recorder.
Press 1 .
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
C
Select the deck.
Press VHS or DV.
D
Access the PlusCode screen.
Press PROG.
E
Access the Programme screen.
The front display panel looks like this:
F
Enter the programme start time.
The front display panel looks like this:
G
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
● Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
Before performing Express Timer Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Press START+/–. (If you’re
just starting out, “P1”
appears.)
Press START+/– to enter the
time you want recording to
start.
● Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
SR-VS30EK_1.book Page 38 Friday, February 1, 2002 1:50 PM