JVC VN-V685U - Manual (Page 106)

106
n: Position Number (0 – 99)
MODEL Kind of camera
(0: VN-V685, 1: VN-V686/VN-V686B)
*This property is not supported by ActiveX built in VN-V686 before v1.04.
*If this property is not set, zoom control is likely not correctly.
Version2 If you use Intelligent Tracking, this property is set at 1.
(0: not use, 1: use) Default: 0
*This property is not supported by VN-V686 before v1.02.
*If this property is not set, DispTrackStatus and DispTrackFrame is not ....
8.3. Method of ActiveX Control
JPEG Viewer/MPEG-4 Viewer
Method Meaning
Play() Start playback
Stop() Stop playback
Capture()
*JPEG only Save still image of JPEG
(Saved folder is specified by “Folder Name” of property”)
ResizeTo()
*MPEG-4 only Activate settings of “DispWidth” and “DispHeight” of property
This is required for MPEG-4 viewer. JPEG viewer does not need the method.
*This property is not supported by ActiveX built in VN-V686 before v1.04.
PTZ Control Client
Method Meaning
Initialize() Initialize PTZ Control Client
*It must be called before using ptz control
Destroy() Finalizing PTZ Control Client
*It must be called when the application using ActiveX control is closed.
ManualCtrl(n) Start Pan/Tilt according to specified direction
Direction Number of “n”
upper-left up upper-right 7 8 9
left - right 4 5 6
under-left down under-right 1 2 3
ZoomCtrl(n) Start Zoom-In/Zoom-Out
(n = 0: Zoom-In, n = 1: Zoom-Out)
Stop() Stop Pan/Tilt/Zoom
SetAutoFunction(n) Control Auto Function
(n = 0: stop auto function, n = 1: start auto pan, n = 2: start auto patrol, n = 3: start auto
trace, n = 4: start auto tracking, n = 5: start Intelligent Tracking)
*Intelligent Tracking is not supported by VN-V686 before v1.02.
OnePushAWC() Issue one push AWC
SetPosition(n, str) Register current position as preset position
n: Position Number (0 – 99)
str: Position Title (0 - 32 characters)
DeletePosition(n) Unregister specified preset position
n: Position Number (1 – 99) *Cannot unregister Home Position
MovePosition(n) Move to specified preset position
n: Position Number (0 – 99)