JVC VN-V685U - Manual (Page 50)

50
Format /api/param?application.ftp.path
Example of Response application.ftp.path=subdir1&200 OK
Response example when setting field is left blank application.ftp.path=&200 OK
Interpretation Acquire the FTP server directory setting used for FTP transmission via alarm.
Allowed users admin, operator, user
Setting FTP Server Path for VN-V685/686/686B
Format /api/param?application.ftp.path=data
Example /api/param?application.ftp.path=subdir1
Example of Response application.ftp.path&200 OK
Interpretation Change the FTP server directory setting used for FTP transmission. It is possible to set FTP
transmission to a directory under the FTP server home directory by specifying that directory name. Use %2F to
segment the directory. ("2F" is ASCII code of "/".) The maximum directory name size is 63 bytes.
Example /api/param?application.ftp.path=subdir1%2Fsubdir2
By leaving the setting blank as follows, FTP transmission will be set to the FTP server home directory.
/api/param?application.ftp.path=%00
Allowed users admin, operator
Getting FTP Server User Name Setting from VN-V685/686/686B
Format /api/param?application.ftp.user
Example of Response application.ftp.user=somename&200 OK
Response example when setting field is left blank application.ftp.user=&200 OK
Interpretation Acquire the FTP server user name setting used for FTP transmission via alarm.
Allowed users admin, operator
Setting FTP Server User Name for VN-V685/686/686B
Format /api/param?application.ftp.user=data
Example /api/param?application.ftp.user=somename
Example of Response application.ftp.user&200 OK
Interpretation Change the FTP server user name setting used for FTP transmission via alarm. The maximum user
name size is 32 bytes. Set as follows when this setting is to be left blank.
/api/param?application.ftp.user=%00
Allowed users admin, operator
Setting FTP Server Password for VN-V685/686/686B
Format /api/param?application.ftp.password=data