JVC VN-V685U - Manual (Page 72)

72
camera.status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting Speed of Auto Pan from VN-V685/686/686B
Format /api/param?camera.motion.auto_pan.speed
Example of response camera.motion.auto_pan.speed=50&200 OK
Interpretation Acquire speed of auto pan. Value from 0 to 100 is returned. The speed is 3 steps internally.
Allowed users admin, operator, user
Setting Speed of Auto Pan for VN-V685/686/686B
Format /api/param?camera.motion.auto_pan.speed=data
Example to set maximum speed /api/param?camera.motion.auto_pan.speed=100
Example of Response camera.motion.auto_pan.speed&202 Accepted(camera.status=save)
Interpretation Set speed of auto pan. Specify 0 to 100. The speed is 3 steps internally. The change is saved by the
API, camera.status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Setting Current Position as Start Position of Auto Pan for
VN-V685/686/686B
Format /api/param?camera.motion.auto_pan.start_point=present
Example of Response camera.motion.auto_pan.start_point&200 OK
Interpretation Set current position as start position of auto pan. Pan/tilt/zoom/focus positions are saved.
Caution: Though Moving to tilt position over 90 degrees is possible when auto flip mode is digital flip, select tilt
position under 90 degrees as start position of auto pan.
Allowed users admin, operator
Setting Current Position as End Position of Auto Pan for VN-V685/686/686B
Format /api/param?camera.motion.auto_pan.end_point=present
Example of Response camera.motion.auto_pan.end_point&200 OK
Interpretation Set current position as end position of auto pan.
Allowed users admin, operator
(5) Auto Trace
Getting Status of Auto Trace from VN-V685/686/686B
Format /api/param?camera.motion.auto_trace.status