JVC VN-V685U - Manual (Page 48)

48
Example /api/param?application.pop.host=192.168.0.200
Example of Response application.pop.host&200 OK
Interpretation Change the address setting of the POP server. Specify the IP address or FQDN. The maximum FQDN
size is 63 bytes. Specify as 0.0.0.0 when the POP server is not set. It is also possible to leave the setting field blank as
follows. /api/param?application.pop.host=%00
Allowed users admin, operator
Getting POP Server Port Number Setting from VN-V685/686/686B
Format /api/param?application.pop.port
Example of Response application.pop.port=110&200 OK
Interpretation Acquire the port number setting of the POP server.
Allowed users admin, operator, user
Setting POP Server Port Number for VN-V685/686/686B
Format /api/param?application.pop.port=data
Example /api/param?application.pop.port=110
Example of Response application.pop.port&200 OK
Interpretation Change the port number setting of the POP server.
Allowed users admin, operator
Getting POP Server User Name Setting from VN-V685/686/686B
Format /api/param?application.pop.user
Example of Response application.pop.user=somename&200 OK
Response example when setting field is left blank application.pop.user=&200 OK
Interpretation Acquire the user name setting of the POP server. The user name is used as local part of sender mail
address when sender mail address setting is blank. When the user name is blank, the local-part is set to "vn_v686".
Example of Response application.pop.user=somename&200 OK
Example of Mail Address [email protected]
Allowed users admin, operator, user
Setting POP Server User Name for VN-V685/686/686B
Format /api/param?application.pop.user=data
Example /api/param?application.pop.user=somename
Example of Response application.pop.user&200 OK
Interpretation Change the user name setting of the POP server. The maximum user name size is 64 bytes. Set as
follows when this is to be left blank.