JVC VN-V685U - Manual (Page 80)

80
Interpretation Changes of following network parameters become valid by this API.
DHCP, IP Address, Subnet Mask, TTL, MTU, TOS, Negotiation, IPv6
Changes are not reflected in the actions until this API is used. APIs to get settings of those parameters return previous
values until this API is used. When this API is issued, VN-V685/686/686B reboots in about 1 minute.
Allowed user admin
Getting DHCP Setting from VN-V685/686/686B
Format /api/param?network.interface.dhcp.status
Example of Response network.interface.dhcp.status=off&200 OK
Interpretation Acquire the current DHCP setting.
Allowed users admin, operator, user
Setting DHCP for VN-V685/686/686B
Format /api/param?network.interface.dhcp.status=data
Example /api/param?network.interface.dhcp.status=on
Example of Response
network.interface.dhcp.status&202 Accepted(network.interface.status=restart)
Interpretation Change the DHCP setting. Specify "on" or "off". To validate the change, use
"network.interface.status=restart" API that reboots VN-V685/686/686B in about 1 minute.
Allowed user admin
Getting IP Address from VN-V685/686/686B
Format /api/param?network.interface.ip
Example of Response network.interface.ip=192.168.0.2&200 OK
Interpretation Acquire the current IP address.
Allowed users admin, operator, user
Setting IP Address for VN-V685/686/686B
Format /api/param?network.interface.ip=data
Example /api/param?network.interface.ip=192.168.0.2
Example of Response
network.interface.ip&202 Accepted(network.interface.status=restart)
Interpretation Change the IP address. To validate the change, use "network.interface.status=restart" API that reboots
VN-V685/686/686B in about 1 minute. Set appropriate combination of IP address, subnet mask and default gateway
before "network.interface.status=restart".
Allowed user admin