JVC HR-J4006UM - Manual (Page 44)

10
EN
Tuner
Set Receivable Channels
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS TUNER SET
SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing CH
5∞ or PUSH
JOG
%fi, then press OK or
PUSH JOG .
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO
CHANNEL SET" by
pressing CH
5∞ or PUSH
JOG %fi, then press OK or
PUSH JOG .
● Receivable channels in
your area are
automatically assigned to
the CH
5∞ buttons, and
non-receivable channels
are skipped.
NOTES:
● At the end of Auto
Channel Set, "SCAN
COMPLETED" appears
on screen.
● If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU.
INITIAL SETTINGS (cont.)
%
%
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
1 2 3
4 5
0
6
7 8 9
•• ••
1
2
4
3
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
POWER
OK
CH
MENU
POWER
MENU
OK
PUSH JOG
CH
MAIN MENU
FUNCTION SET
=TUNER SET
INITIAL SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
TUNER SET
BAND CATV
=AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( 5,∞) AND (OK)
PRESS (MENU) TO END