JVC HR-J4006UM - Manual (Page 53)

EN
19
Record One Program While
Watching Another
Recording
Features
ENGAGE TV MODE
1
During recording...
● Press TV/VCR. The VCR's VCR indicator goes out. (If
you are using the RF connection (
੬
pg. 4) to view
the output from your VCR, the TV broadcast being
recorded disappears.)
● If you are using the AV connection ( ੬
pg. 4) to view
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time.
All indications corresponding to the current status of the
VCR are displayed for 5 seconds. The counter display
remains on the screen indicating the elapsed time.
Press OSD again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" ( ੬
pg. 18).
● The indications are not recorded.
● Each time you press OSD, the indication on the front
display panel will also change as follows: counter
reading
= channel number = clock time. (Channel
number is not displayed during playback.)
Display Elapsed Recording
Time
1 2 3
4 5
0
6
7 8 9
•• ••
1
2
4
3
OSD
TV/VCR
C.RESET