Activate high-speed search, Start search, Access distant code – JVC HR-J4006UM User Manual

Page 49: Engage manual tracking mode, Adjust manual tracking, Re-engage automatic tracking, High-speed search, Index search, Manual tracking

Advertising
background image

EN

15

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1

During playback or still, press FF for forward high-

speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still, press and hold

FF

or

REW

. When released, normal playback resumes.

Index Search

Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.

START SEARCH

1

While the tape is stopped, press PUSH JOG or

(™ or £).

ACCESS DISTANT CODE

2

To access a recording 2–9 index codes away, press

PUSH JOG or (™ or £) repeatedly until the
correct number is displayed on screen (only if "SUPER-
IMPOSE" is set to "ON"

pg. 18). Playback begins

automatically when the desired recording is located.

● If necessary press REW or FF when play starts to

search visually to find the very beginning of the
desired program.

NOTE:

An index code is not placed on the tape when recording is
paused and then resumed.

fi

%

1

2

3

4

5

0

6

7

8

9

••

••

1

2

4

3

FF

PLAY

REW

FF

REW

PLAY

fi

%

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is
engaged. If tracking noise appears in the picture, you can
override this and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

1

During playback, press the CH

5 and ∞ buttons on the

VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.

ADJUST MANUAL

TRACKING

2

Press CH

5 or ∞ on the VCR's front panel or remote.

Press briefly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

3

Press the CH

5 and ∞ buttons on the VCR's front panel

simultaneously.

● When automatic tracking is re-engaged, B.E.S.T. is

automatically activated.

NOTES:

To obtain a noiseless still picture it may be necessary to adjust
tracking in slow playback and then engage Pause.

Manual tracking is possible during hands-free slow-motion.
During hands-free slow-motion playback, simply press

CH

5

or

on the VCR's front panel or remote to adjust tracking.

PUSH JOG

CH

CH

Advertising