John Deere 9030 Series - Manual (Page 16)

ENGINE
Type
John Deere PowerTech Plus diesel,
in-line, 6-cylinder
Aspiration
Variable geometry turbocharger
with air-to-air aftercooling and
exhaust gas recirculation
Engine air filter
Dual stage with engine
cooling fan aspiration
Displacement - bore
and stroke
549 cu. in. (9.0 L) - 4.66 x 5.35 in.
(118.4 x 136 mm),
824 cu. in. (13.5 L) - 5.2 x 6.5 in.
(132 x 165 mm)
Compression ratio 16:1
Fuel injection system:
High Pressure Common Rail (9.0 L only),
Electronic unit injectors (13.5 L)
Lubrication Full-pressure, full-flow filtration
Oil filter Replaceable cartridge style oil filter
FUEL SYSTEM
Type Self priming
Filter system
Two stage with water separator
and service indicator light
Primary filter,
secondary filter
10 micron replaceable cartridge,
2 micron with spin-on element
ELECTRICAL SYSTEM
Alternator, batteries
200 amp, 3 – 12 volt,
(2775 total cold cranking amps)
with battery boost terminal
MODEL 9430T 9530T 9630T
ENGINE PERFORMANCE
Rated engine hp at 2100 engine rpm 425 hp (313 kW) 475 hp (349 kW) 530 hp (390 kW)
Engine hp, 97/68/EC at 2100 engine rpm 439 hp (323 kW) 491 hp (361 kW) 543 hp (499 kW)
PTO hp at 1,895 rpm 302 hp (225 kW) NA NA
TRANSMISSION
18-Speed Automatic PowerShift (18 Forward/6 Reverse) Standard Standard Standard
FRONT AXLE
Equipped with AirCushion suspension system Standard Standard Standard
REAR AXLE
Differential steer without outboard planetary axle Standard Standard Standard
TRACK BELTS
30-inch wide belt Standard Standard Standard
36-inch wide belt Optional Optional Optional
HYDRAULIC SYSTEM (type) (Closed-center, pressure/flow compensated)
Electrohydraulic selective control valves 4 base, 5th and 6th optional
Main pump, axial piston (displacement) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 )
Maximum pressure 2900 psi (20 000 kPa) 2900 psi (20 000 kPa) 2900 psi (20 000 kPa)
Maximum pump flow 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min)
Available flow available at 1 SCV 30 gpm (114 L/min) 30 gpm (114 L/min) 30 gpm (114 L/min)
Available flow available at 2 SCVs 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min)
3-POINT REAR HITCH WITH QUICK COUPLER
Category 4/4N with up to 15,300 lb. (6940 kg) maximum hitch-lift capacity Optional Optional Optional
DRAWBAR
Category 4 Drawbar with heavy-duty hammerstrap Optional NA NA
Category 4 Drawbar reinforcement up to 11,000 lb. (4990 kg) Optional NA NA
Category 4 Wide-swing drawbar on rollers Standard NA NA
Category 5 Wide-swing drawbar on rollers Optional Standard Standard
Category 5 Wide-swing drawbar with bottom rollers Optional Optional Optional
Category 5 Drawbar reinforcement up to 12,000 lb. (5443 kg) Optional Optional Optional
Secondary chain support Standard Standard Standard
PTO (Fully independent Power Take Off)
1¾-in. diameter, 20 spline, 45 mm, 1,000 rpm Optional NA NA
CAPACITIES
Fuel tank 330 gal. (1249 L) 330 gal. (1249 L) 330 gal. (1249 L)
Cooling system 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L)
Crankcase with filter 11 gal. (41.6 L) 15.8 gal. (59.8 L) 15.8 gal. (59.8 L)
Hydraulic system with 3-point rear hitch 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L)
Hydraulic system without 3-point rear hitch 27.5 gal. (104.1 L) NA NA
BRAKES
Hydraulic power, wet disk, self adjusting Standard Standard Standard
AVERAGE BASE WEIGHT less weights, with no PTO, and no 3-point rear hitch:
Tracks 43,000 lb. (19 504 kg) 43,000 lb. (19 504 kg) 43,000 lb. (19 504 kg)
common specifications
Specifications by model – 4wD
MODEL 9230 9330 9430 9530 9630 9430 Scraper Special 9530 Scraper Special 9630 Scraper Special
ENGINE PERFORMANCE
Rated engine hp at 2,100 engine rpm 325 hp (239 kW) 375 hp (276 kW) 425 hp (313 kW) 475 hp (349 kW) 530 hp (390 kW) 425 hp (313 kW) 475 hp (349 kW) 530 hp (390 kW)
Engine hp, 97/68/EC at 2,100 engine rpm 337 hp (248 kW) 388 hp (285 kW) 439 hp (323 kW) 491 hp (361 kW) 543 hp (399 kW) 439 hp (323 kW) 491 hp (361 kW) 543 hp (399 kW)
PTO hp at 1,895 rpm 263 hp (196 kW) 320 hp (238 kW) 320 hp (238 kW) NA NA 320 hp (238 kW) NA NA
FINAL DRIVES Inboard planetary Inboard planetary Inboard planetary
Inboard planetary with
double-reduction axle
Inboard planetary with
double-reduction axle
Inboard planetary
Inboard planetary with
double-reduction axle
Inboard planetary with
double-reduction axle
TRANSMISSIONS
18-Speed Automatic PowerShift (18 Forward/6 Reverse) Optional Optional Optional Standard Standard Standard Standard Standard
24-Speed Manual Shift (24 Forward/6 Reverse) Standard Standard Standard NA NA NA NA NA
AXLES
100 mm x 3045 mm (120 in.) Standard NA NA NA NA NA NA NA
110 mm x 3045 mm (120 in.) Optional Standard Standard NA NA Standard NA NA
120 mm x 3045 mm (120 in.) NA NA NA Standard Standard NA Standard Standard
DIFFERENTIAL LOCK
Hydraulic differential lock Optional Optional Optional Standard Standard Standard Standard Standard
HYDRAULIC SYSTEM (Closed-center, pressure/flow compensated)
Electrohydraulic selective control valves 4 standard, 5th and 6th optional 4 standard with 48 gpm (182 L/min) flow, or 4 optional with Scraper High Flow 75 gpm (283.9 L/min)
Main pump, axial piston (displacement) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 ) 4.5 cu. in. (75 cm 3 )
Maximum pressure 2900 psi (20 000 kPa) 2900 psi (20 000 kPa) 2900 psi (20 000 kPa) 2900 psi (20 000 kPa) 2900 psi (20 000 kPa)
Maximum pump flow with PowerShift Transmission 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min)
Maximum pump flow with Manual Shift Transmission 44 gpm (167 L/min) 44 gpm (167 L/min) 44 gpm (167 L/min) NA NA
Available flow available at 1 SCV 30 gpm (114 L/min) 30 gpm (114 L/min) 30 gpm (114 L/min) 30 gpm (114 L/min) 30 gpm (114 L/min)
Available flow available at 2 SCVs with PowerShift Transmission 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min) 48 gpm (182 L/min)
Available flow available at 2 SCVs with
Manual Shift Transmission
44 gpm (167 L/min) 44 gpm (167 L/min) 44 gpm (167 L/min) NA NA
3-POINT REAR HITCH WITH QUICK COUPLER
Category 3/4N with up to 15,300 lb. (6940 kg)
maximum hitch-lift capacity
Optional (N/A with 100 mm axle) Optional Optional Optional Optional NA NA NA
Category 4/4N with up to15,300 lb. (6940 kg)
maximum hitch-lift capacity
Optional (N/A with 100 mm axle) Optional Optional Optional Optional NA NA NA
DRAWBAR
Category 4 Drawbar Standard Standard Standard NA NA NA NA NA
Category 4 Heavy-duty drawbar support Optional Optional Optional NA NA NA NA NA
Category 4 Drawbar reinforcement up to 11,000 lb. (4990 kg) Optional Optional Optional NA NA NA NA NA
Secondary chain support Standard Standard Standard Standard Standard NA NA NA
Category 5 Drawbar up to 12,000 lb. (5443 kg) not compatible
with 3-point hitch or PTO
Optional Optional Optional Standard Standard NA NA NA
PTO (Fully independent Power Take-Off)
1¾-in. diameter, 20 spline, 45 mm, 1,000 rpm Optional Optional Optional NA NA NA NA NA
CAPACITIES
Fuel tank 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L) 350 gal. (1325 L)
Cooling system 12.5 gal. (47.3 L) 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L) 14 gal. (53 L)
Crankcase with filter 8.4 gal. (31.8 L) 11 gal. (41.6 L) 11 gal. (41.6 L) 11 gal. (41.6 L) 11 gal. (41.6 L) 11 gal. (41.6 L) 11 gal. (41.6 L) 11 gal. (41.6 L)
Hydraulic system with 3-point rear hitch 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L) 28 gal. (106 L)
Hydraulic system without 3-point rear hitch 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L) 27 gal. (102.2 L)
BRAKES
Hydraulic power, wet disk, self adjusting
on front and rear axle, plus secondary brake
Standard Standard Standard Standard Standard Standard Standard Standard
Hydraulic trailer brakes Optional Optional Optional Optional Optional Optional Optional Optional
ESTIMATED SHIPPING WEIGHT for tractor equipped with standard tires, with no PTO, and no 3-point rear hitch:
4WD 32,170 lb. (14 592 kg) 34,134 lb. (15 483 kg) 35,530 lb. (16 116 kg) 36,070 lb. (16 361 kg) 37,290 lb. (16 914 kg) 35,530 lb. (16 116 kg) 36,070 lb. (16 361 kg) 37,290 lb. (16 914 kg)
Specifications by model – Tracks
All John Deere tractors come with a 24
total month/2,000 total hour factory basic
warranty. You may elect to extend your
warranty for engine and powertrain related
components through the PowerGard Protection
Plan. See your dealer for pricing and details, or
go online to
www.powergard.com.
PowerGard ™ extended warranty
protection plan
Note: Specifications and design subject to change without notice.
0 specifications specifications 1