John Deere 9030 Series - Manual (Page 8)

Hitch Command enables your tractor to compensate for changes in
wheel or track slip when field conditions vary. A high setting makes the
tractor more responsive to changing field and soil conditions. If the
tractor exceeds the preset percentage of slip the hitch automatically
raises and lowers to compensate. A 20-spline, 1¾-in. diameter,
1,000-rpm PTO is optional for
the 9330, 9430, and 9430T.
A new Category 5 drawbar
is standard on the 9530,
9530T, 9630, and 9630T.
A 12,000-lb. vertical-load
carrying capacity, and
massive 2.75-inch hitch pin,
give you the added capacity
to pull heavy or extra-wide
implements.
External raise/lower
switch, located on the rear
fender, lets you adjust the
3-point hitch while outside of
the cab for easier hookups.
A Category 4 drawbar is
standard on select 9030
Series Tractors (excludes
9530, 9630, 9530T, and
9630T). An optional Category
4 drawbar with heavy-duty
support is also available to
handle heavier draft loads.
Hitch-lift capacity has been
increased to 15,300 lb.
A 3-point rear hitch with
Quick-Coupler is available
on all models as a factory
or field-installed option.
Drawbar and rear hitch options
New electrohydraulic
PTO option makes it push-
button easy to control your
tractor’s PTO. Engagements
are smooth and precise.
New 9030 Series Tractors give
you Big-Time versatility.
Multiple drawbar choices, plus
an optional 3-point rear hitch and
rear PTO, give you the versatility
to pull wide air seeders, lift heavy
plows, or power large grain carts.
Lift up to 15,300 lb. with your
choice of a Category 3/4N or
Category 4/4N, 3-point hitch with
quick coupler.
A heavy-duty 1¾-in. diameter,
1,000-rpm PTO gives you plenty
of power to drive tillers, grain
carts, and more. New electro-
hydraulic PTO engagement makes
operation push-button easy.
A Category 4 drawbar is
standard equipment on select
9030 Series Tractors (excludes
9530, 9630, 9530T, and 9630T).
A Category 4 conversion kit is
available for use with implements
requiring less than 475 hp.
To pull your extra-large
implements, a new Category 5
drawbar is standard on the 9530,
9530T, 9630, and 9630T.
Plenty of choices
• Multiple drawbar configurations
• Optional 3-point rear hitch
• Optional PTO power
• New push-button PTO control
Pull, lift, or power most anything on your farm
1 hitch/Drawbar/pto 1