John Deere 9030 Series - Manual (Page 9)

Improve fuel economy and optimize productivity
with the Automatic PowerShift. It measures engine load,
throttle position, and gear selection to put you at just the
right speed . . . during field work or transport. Automatic
gear shifts also reduce operator fatigue and improve
pulling efficiency.
The convenient shift lever on the CommandARM console
lets you smoothly move through 18 forward or six reverse
gears with just your thumb. Easily shift into park, neutral,
forward, or reverse, as well as change gears up or down.
Transport up to 24 mph (4WD).
All-new double gear reduction in the planetary allows inputs into the rear differential to
turn faster. This results in lower torque loads on internal components and decreased wear
and loading of the power train – especially the ring gear and pinion. This added durability
provides longer wear life, keeping ownership costs low.
Legendary 18-speed PowerShift
The 24-speed Powr-sync transmission includes a
powershiftable hi-lo feature that lets you easily change
speeds as field conditions change.
Deluxe 24-speed transmission
Choose between two field-proven
transmissions – an 18-speed
PowerShift or a 24-speed
manual shift transmission.
The John Deere 18-speed
PowerShift has been updated
to accommodate the higher
horsepower levels of the 9030
Series. You get more lugging
power in the lower gears where
you need it most.
Shifts are clutch-free and
push-button easy. Robust
housing, shafts, and industrial-
strength bearings make this a
rugged transmission you can
depend on year after year.
The 24-speed manual shift
transmission gives you a wide
range of speeds and a
powershiftable hi-lo for
tremendous versatility in
the field or on the road.
New double-
reduction axle
A John Deere 9630 4-wheel-drive is an ideal
choice to handle your broad-acre tillage chores.
Disking, ripping, or plowing, a 9630 provides up to
530 engine horsepower (583 peak hp with power
bulge) – plenty of muscle to get the job done quickly
and efficiently.
The updated 18-speed Automatic
PowerShift transmission
gives you 10 working
speeds between 3 and
8 mph, in ½ mph
speed increments.
You also get speed
matching between gears
13 and 18 to prevent
sudden jars while
downshifting
during transport.
Shifts are
electronically
modulated for ultra-
smooth performance.
18-Speed PowerShift transmission
Transport up to
22.7 mph on
9030T Series
Track Tractors. Built-in reliability, efficiency
• Smooth, clutch-free shifts
• Automatic shifting improves efficiency
• More power in the lower gears
• Transport up to 24 mph (4WD)
1 transmissions
Shift into action with push-button ease and field-proven reliability
Axle/transmissions 1