John Deere 9030 Series - Manual (Page 7)

Set the Implement Management System (IMS) to
simultaneously perform up to 10 tractor functions per switch
(20 total) – push-button easy. You can simplify complicated
turn sequences and even less experienced operators can
become more productive in less time. IMS boosts efficiency,
enhances productivity, and reduces operator fatigue.
Only John Deere offers
TouchSet hydraulic controls.
As its name implies, just touch
and set hydraulic flow to
individual SCVs, on-the-go,
right from your seat.
Four electrohydraulic SCVs
are standard on all models, with
a fifth or sixth valve available as
a field-installed option. The SCV
control provides six-position
functions that include neutral,
extend, retract, extend detent,
retract detent, and float.
The 9030 Series comes with
a standard 48-gpm hydraulic flow
and an optional High-Flow system
with 78-gpm rated hydraulic flow
at the pump.
Internal valve parts are kept
to a minimum to reduce potential
wear points and to enhance
reliability. That means increased
uptime for your equipment.
When greater hydraulic capacity is needed
up to six SCV remotes are available as a field-
installed option.
Exclusive TouchSet hydraulic control lets
you set and adjust hydraulic flow to individual
SCVs on-the-go right from your seat.
Complete hydraulic control
• Four SCVs are standard
• Up to 78-gpm hydraulic flow
• Adjust hydraulic flow on-the-go
• Implement Management System
exclusive implement Management System
1 hydraulics 1
exceptional hydraulics – plus all of the tools you need to maximize your efficiency