Jacuzzi BY82000 - Manual (Page 15)

TOWER AND DOOR INSTALLATION
STEP 12
Align the glass with glass jamb and insert. Repeat
STEPS 8 through STEP 10 for the other fixed glass
panel.
WALL POST
GLASS
GLAZING GASKET
INSIDE OF
ENCLOSURE
APPLY SEALANT
JAMB
GLASS
GLAZING GASKET
INSIDE OF
ENCLOSURE
APPLY SEALANT
STEP 13
Install glazing gasket on fixed glass walls post and jambs
on the outside. Note orientation of gasket. Soapy water
may help to insert the glazing gasket.
NOTE: The glazing is to be installed on the outside of
enclosure for both wall posts and tower jambs.
Clean any soapy residue off the glass and towers. On
the inside of enclosure, apply sealant to entire length
of glass and wall post as well as the entire length of
the glass and tower jamb.
13
Jacuzzi Whirlpool Bath © BY82000 03/05