Towers and door installation – Jacuzzi BY82000 User Manual
Page 16
STEP 16
Install handles as shown. Note orientation of handle.
Hand tighten knob. Flat screw has a screw driver notch.
Do not over tighten either knob or flat screw as cracked
glass may result.
GLASS
DOOR
WASHERS
LARGE
WASHER
INTERIOR OF
SHOWER
DOOR
HINGE
TOWER COVER
INSERT THIS SIDE FIRST
TOWER COVER
TOWER TOP PLATE
TOWERS AND DOOR INSTALLATION
COVER CAP
STEP 14
Install fixed glass cover cap on wall post.
STEP 15
Install all towers' top cover
STEP 17
Turn on water supply and check for leaks. Correct any
leaks before continuing the installation.
STEP 18
Install all tower cover panels as shown. Align left side of
tower cover panel with inside seat in each tower. Begin
each panel's snap in at the top of the tower.
TOWER
TOP COVER
SCREWS
(2 PER TOWER
14
Jacuzzi Whirlpool Bath
©
BY82000 03/05