Mpeg4 viewer (continued) – JVC VN-V686WPU User Manual
Page 102
102
Settings and operation of Built-in viewer
MPEG4 Viewer Configuration
(continued)
A
Title Bar Display
Settings
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
Camera ID
Select
AOnB to display [Camera ID]. (Up to 16 alphanumeric characters
will be displayed.)
[Camera ID] can be specified on the [Camera] page of VN-V686WPU.
(A Page 38)
DispPositionTitle
Select
AOnB to display the title of the position that is being displayed.
Time
Select
AOnB to display the time.
Format
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
B
Stream Settings
For specifying settings for receiving MPEG4 stream.
Stream
For selecting the protocol when the viewer acquires data from VN-
V686WPU.
When
AHTTPB is selected, lost packets are recovered via resending. VN-
V686WPU may be monitored using multiple viewers when
AMulticastB is
selected.
Memo
:
● When playing back via multicast, start multicast sending on the
Streaming page of the VN-V686WPU unit.
[Streaming Page] (A Page 70)
Note：
● When Built-in viewer is launched with AMulticastB specified, a Windows
firewall warning may appear. In this case, select
AunblockB and proceed.
● If AblockB is selected, the Windows firewall will block the multicast stream
and playback of multicast by the viewer will fail.
HTTP Port
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V686WPU. (A Page 69)
Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.2.1.
VN-V686WPU_EN.book Page 102 Friday, February 8, 2008 5:20 PM