JVC VN-V686WPU - Manual (Page 72)

72
Setting Using Internet Explorer
Access Restrictions Page
This page is for setting client restrictions.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry
will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● This feature is targeted at JPEG/MPEG4 acquisition. It does not impose restrictions on access via a web
browser or use of API.
Note：
● The Access Restriction feature determines whether to impose restrictions during TCP connection by the
client. In the case when access restriction is set after TCP connection by a client has been established,
TCP connection will not be disconnected.
Setting (continued)
B
A
VN-V686WPU_EN.book Page 72 Friday, February 8, 2008 5:20 PM