JVC VN-V686WPU User Manual

Page 115

Advertising
background image

115

Symptom

Causes and Countermeasures

Reference

Page

Multicast images cannot be
played back

● Start multicast transmission manually from the

[Streaming] page of VN-V686WPU.

● In the case of multicast reception at Built-in viewer,

check that the multicast address and port number
of Built-in viewer settings coincide with those on the
[Streaming] page of VN-V686WPU.
Make use of a network that supports IGMP v2 for
multicast transmission.

● Multicast may be blocked by the WindowsXP

firewall. When this occurs, perform the following to
allow it to pass through.
Double-click [Windows Firewall] under [Start]-
[Control Panel], click the [Add Port…] button
under the Exception tab, and register the port
number to be allowed through the firewall in the
Port Number field. Enter an arbitrary character
string in the name field.

A Page 70
A Page 96
A Page 101

The frame rate of the
displayed image is low

● Check Built-in viewer settings when a built-in viewer

is in use.

● Frame rate will be constrained when the network

bandwidth is narrow.

A Page 96
A Page 101

A white zone appears in Built-
in viewer

For some computers, a part of the Internet Explorer
graphics may not appear and is left white when the
following setting is performed on the Internet
Explorer.
If [Right-click on the Desktop screen]-[Properties]-
[Settings]-[Advanced]-[Advanced]-[DPI setting] is
set to

ALarge sizeB or ACustom sizeB, select

ANormal size(96DPI)B to resume normal drawing.

^

A warning message appears
upon starting up Built-in
viewer

Built-in viewer consists of a software component
called ActiveX.
The ActiveX is usually installed when Built-in viewer
is used for the first time. However, installation may
be rejected depending on the Anti-virus software
settings. In this case, change the settings of the
Anti-virus software before installing Built-in viewer.

^

VN-V686WPU_EN.book Page 115 Friday, February 8, 2008 5:20 PM

Advertising