JVC VN-V686WPU - Manual (Page 108)

108
Settings and operation of Built-in viewer
Operation (continued)
PTZ Controller Operation
(continued)
E Pan/Tilt manual
operation button,
[Home] button Click the arrow button to move the camera in that direction. Release the
button to stop the movement.
Click the [Home] button to move to the home position.
F Speed This item sets the operation speed.
Pan/Tilt This item sets the operation speed of the Pan/Tilt manual operation
button E.
Increase the number to increase the operation speed.
[Setting range:1 to 8]
Focus/Zoom This item sets the operation speed of the [Zoom] operation button D and
the [Focus] operation button L.
Increase the number to increase the operation speed.
[Setting range : 1 to 4]
G Variable Speed This function adjusts the Pan/Tilt operation speed by the zoom ratio.
Select the checkbox to slow down at Tele and to move quickly at Wide.
Deselect the checkbox to always move the camera at the speed
configured under the [Speed] item F of Pan/Tilt regardless of the zoom
ratio.
H B/W Mode This sets the function to switch from Color to B&W mode.
Color
: Always be in Color mode.
Black & White
: Always be in B&W mode.
Auto Low,Auto Mid,Auto High
: This item automatically switches between Color Mode and
B&W Mode when the luminance meets defined conditions over
30 seconds. Select the sensitivity from three options.
Memo :
To ensure a successful B&W/Color switching
● If the [B/W Mode] item is set to AAuto Low, Auto Mid, Auto HighB, the
B&W/Color setting can be switched according to the brightness of the
object, but the condition of illumination and field angle may make this
impossible. To be absolutely certain of B&W/Color switching, connecting
external sensor to alarm input cable of this camera and setting alarm
action of B&W mode is recommended.
VN-V686WPU_EN.book Page 108 Friday, February 8, 2008 5:20 PM