John Lewis JLDWW 1205 - Manual (Page 27)

The wash results are not satisfactory
The dishes are not clean • The wrong programme has been selected.
• The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.
• The spray arms do not rotate freely due to incorrect
arrangement of the load.
• The filters in the base of the washing compartment are
dirty or incorrectly positioned.
• Too little or no detergent has been used.
• Where there are limescales deposits on the dishes; the
salt container is empty or the incorrect level of the water
softener has been set.
• The drain hose connection is not correct.
• The salt container cap is not properly closed.
The dishes are wet and dull • Rinse aid was not used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or a
bluish coating on glasses and dishes • Decrease rinse aid dosage.
Water drops have dried onto
glasses and dishes • Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
Technical data
Dimensions Width
Height
Depth 60 cm
85 cm
61 cm
Electrical connection - Voltage - Overall
power - Fuse Information on the electrical connection is given on the
rating plate on the inner edge of the dishwasher door.
Water supply pressure Minimum
Maximum 0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Capacity 12 place settings
Weight 42,5 kg
27