John Lewis JLDWW 1205 - Manual (Page 32)

Electrical connection
Warning! Safety standards require
the appliance to be earthed.
Prior to using the appliance for the first
time, ensure that the rated voltage and
type of supply on the rating plate
match that of the supply where the
appliance is to be installed. The fuse
rating is also to be found on the rating
plate.
Always plug the mains plug into a
correctly installed shockproof socket.
Multi-way plugs, connectors and
extension cables must not be used.
This could constitute a fire hazard
through overheating.
If necessary, have the domestic wiring
system socket replaced. In case that
the electrical cable has to be replaced,
contact your local repair agent.
The plug must be accessible after the
appliance has been installed.
Never unplug the appliance by pulling
on the cable. Always pull the plug.
The manufacturer accepts no liability
for failure to observe the above safety
precautions.
Repairs - After sales service
If the unlikely event of your appliance requiring
service, or if you wish to purchase spare parts,
please contact our extended warranty
administrators by telephoning:
0870 010 7887
They will give you details of your local Service
Force Centre. Before calling out an engineer, please ensure
you have read the details under the heading
''Something Not Working''.
When you contact your local repair agent you
will need to give the following details:
1. Your name, address and post code.
2. Your telephone number.
3. Clear and concise details of fault.
32