JVC KD-APD89 - Manual (Page 14)

ENGLISH
14
4 • Select “Connect” or “Disconnect” to
connect/disconnect the selected device.
• Select “Delete,” then confirm the selection.
Press number button 3 to select
“No” or return to the previous
screen.
You can set the unit to connect the Bluetooth device
automatically when the unit is turned on. (See
“Auto Connect” on page 32.)
3 • For available devices...
1 Enter the specific PIN code of the device to
the unit.
Refer to the instructions supplied with the
device to check the PIN code.
2 Use the Bluetooth device to connect.
Now connection is established and you can
use the device through the unit.
• For special device...
Use “Open” or “Search” to connect.
Connecting/disconnecting/deleting a
registered device
1
Select “BT-PHONE” or “BT-AUDIO.”
2 Select a registered device you want to
connect/disconnect/delete.
3 Enter setting menu.
Using the Bluetooth cellular phone
1 Select “BT-PHONE.”
2 Enter Bluetooth menu.
3
—
Establish the connection with a device, then make a call (or settings
using the Bluetooth menu).
EN14-19_KD-APD89[J]3.indd 14 EN14-19_KD-APD89[J]3.indd 14 11/29/07 2:20:50 PM 11/29/07 2:20:50 PM