Basic recording, Vhs deck) – JVC HR-DVS3EU User Manual
Page 21
Masterpage:Right-NoTitle0
EN
21
Filename [DVS3EU_1a-EN.fm]
Page 21
October 8, 2001 2:37 pm
Basic Recording
(VHS deck)
A
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
● The recorder’s power comes on automatically.
B
Select the VHS deck.
Press VHS.
● The VHS button lights on the recorder.
C
Choose a programme.
Press PR +/– or the number keys. Or push the JOG dial
and turn it to the left or right to select the channel you
wish to record.
D
Set the tape speed.
Press SP/LP (
p
). Check the SP/LP indicator on the
recorder’s front display panel to confirm the selected tape
speed.
E
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
● The VHS recording indicator lights on the recorder.
F
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press
8
. Then press to remove the cassette.
● The VHS recording indicator turns off.
NOTE:
It is not possible to record a TV programme on both the VHS
deck and the DV deck simultaneously. In addition, it is not
possible to record simultaneously from the same external input.
Turn on the TV and select the AV mode.
1
3
2
1
2
3
4
5
6
7
8
9
1
2
1
2
3
0
3
4
4
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
੬
pg. 29)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
੬
pg. 69).
DVS3EU_1a-EN.fm Page 21 Monday, October 8, 2001 2:44 PM