JVC HR-DVS3EU - Manual (Page 7)

Masterpage:Right-index
EN
7
Filename [DVS3EU_1-EN.fm]
Page 7 October 8, 2001 2:36 pm
ON-SCREEN DISPLAY (for VHS deck)
When “O.S.D.” is set to “ON” (
੬
pg. 69), various
operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP/EP
* EP is for NTSC playback only.
C Tape Direction
D Counter Display
E Tape Remaining Time Indicator
੬ pg. 27
F Audio Mode Display ੬ pg. 25
G Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3 or
5 from the Stop mode
or perform an Index Search
(
੬
pg. 23). The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
H Type of Broadcast ੬ pg. 28
I VHS Indicator
J Current Day/Month/Year
K Clock Display
L Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(DV
] VHS/DV } VHS) ੬ pg. 44, 45
M Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
N “Cassette Loaded” Mark
Beginning End
ON-SCREEN DISPLAY (for DV deck)
When “O.S.D.” is set to “ON” (
੬
pg. 69), various
operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP
C Sound Mode Display
੬ pg. 73
D Time Code Display ੬ pg. 35
E Audio Mode Display ੬ pg. 33
F Type of Broadcast ੬ pg. 35
G DV Indicator
H Current Day/Month/Year
I Clock Display
J Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(DV
] VHS/DV } VHS) ੬ pg. 44, 45
K Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
& on the remote control.
ERROR Indicator*
* ERROR indicator appears when you start dubbing a tape with a
copy protection signals or when Audio Dubbing or Insert Editing is
not possible depending on the condition.
L “Cassette Loaded” Mark
DVS3EU_1-EN.fm Page 7 Monday, October 8, 2001 2:45 PM