JVC HR-DVS3EU - Manual (Page 34)

Filename [DVS3EU_1a-EN.fm]
Masterpage:Left
34
EN
Page 34 October 8, 2001 2:37 pm
PLAYBACK/RECORDING ON DV DECK (cont.)
Recording Features
(DV deck)
Record One Programme While
Watching Another
Once recording is in progress, all you need to do is to set
the channel controls on the TV for the station you wish to
view.
● The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
recorder’s PR buttons is recorded on the tape.
● If a decoder is connected to the recorder ( ੬
pg. 66), you can
select a scrambled channel as well with the TV channel
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 2 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1 Start recording.
Press 7 on the recorder.
2 Engage the ITR mode.
Press 7 again. “ o ” blinks and “0:30” appears on the front
display panel.
3 Set the recording duration.
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the
7
button on the recorder’s
front panel.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (in the right column) or timer recording
(
੬
pg. 36, 38, 40), the recording will resume automatically
when power is restored to the recorder unless the recorder’s
memory backup has expired.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, set
its erase protection switch to “SAVE”. To record on it later, set
the switch to “REC”.
1 3 2
Erase protection switch
DVS3EU_1a-EN.fm Page 34 Monday, October 8, 2001 2:44 PM