JVC HR-DVS3EU - Manual (Page 87)

Masterpage:Right
EN
87
Filename [DVS3EU_4-EN.fm]
Page 87 October 8, 2001 2:37 pm
QUESTIONS AND ANSWERS
PLAYBACK
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the
beginning.
Q. Can the video recorder indefinitely remain in
the still mode?
A. No. It stops automatically after 5 minutes on the
VHS deck, 3 minutes on the DV deck to protect
the heads.
Q. When returning from variable-speed search to
normal playback, the picture is disturbed.
Should I be concerned about this?
A. No, it is normal.
Q. Noise bar appear during variable-speed search.
What’s the problem?
A. This is normal.
Q. Sometimes, during Index Search, the video
recorder can’t find the programme I want to
see. Why not?
A. There may be index codes too close together.
RECORDING
Q. When I pause and then resume a recording, the
end of the recording before the pause is
overlapped by the beginning of the
continuation of recording. Why does this
happen?
A. This is normal. It reduces distortion at the pause
and resume points.
Q. Can the video recorder indefinitely remain in
the Record-Pause mode?
A. No. The video recorder goes to its Stop mode
automatically after 5 minutes to protect the
heads.
Q. What happens if the tape runs out during
recording?
A. The video recorder stops recording, and “
[
”
on the front display panel won’t stop blinking.
TIMER RECORDING
Q. “
o
” and “
#
” remain lit on the front display
panel. Is there a problem?
A. No. This is a normal condition for a timer
recording in progress.
Q. Can I programme the timer while I’m watching
a tape or a TV broadcast?
A. You won’t see the picture as it is replaced by the
on-screen menu, but the audio from the
programme or tape you’re viewing can be
heard.
DVS3EU_4-EN.fm Page 87 Monday, October 8, 2001 2:39 PM