JVC HR-DVS3EU - Manual (Page 28)

Filename [DVS3EU_1a-EN.fm]
Masterpage:Left
28
EN
Page 28 October 8, 2001 2:37 pm
PLAYBACK/RECORDING ON VHS DECK (cont.)
Retake
You can cut out unnecessary parts of a TV programme while you
are recording it.
1 Engage the Record-Pause mode.
Press 9 during recording.
2 Locate the start point.
Turn the JOG dial to the left or right (or hold down 3
or 5 ) and release it when you reach the point where
you want to resume recording.
● Your recorder returns to the Record-Pause mode.
3 Resume recording.
Press 4 when you wish to resume recording.
NOTE:
Retake function does not work during Direct Rec (
੬
pg. 19,
69).
Receiving Stereo and Bilingual
Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) making reception
of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
● To listen to a stereo programme, press AUDIO until
“HIFI L
j h
R” appears on the TV screen.
● To listen to a bilingual programme, press AUDIO until
“HIFI L j ” or “HIFI h R” appears on the TV screen.
● To listen to the standard (Regular Monaural) audio while
receiving a NICAM broadcast, press AUDIO until “NORM”
appears on the front display panel or the TV screen.
NOTE:
“O.S.D.” must be set to “ON” or the on-screen displays will not
appear (
੬
pg. 69).
To Record Stereo and Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed L
and R channel sound).
● Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be
recorded on the normal audio track.
To Record NICAM Stereo and Bilingual
Programmes
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the standard audio programme will be recorded
on the normal audio track.
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Soundtrack Selection” on
page 25.
End of programme Beginning of programme
Recorded part
Go back to end of programme to cut out
unnecessary part
Programme Programme
Unnecessary
part
Unnecessary
part
Type of Broadcast Being
Received
On-screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural ST
BIL.
(none)
ST NICAM
BIL. NICAM
NICAM
DVS3EU_1a-EN.fm Page 28 Monday, October 8, 2001 2:44 PM