Juniper Networks J-series Services Router J2320 - Manual (Page 15)

About This Guide
This preface provides the following guidelines for using the J2320, J2350, J4350, and
J6350 Services Router Getting Started Guide:
■ Objectives on page xv
■ Audience on page xv
■ How to Use This Guide on page xvi
■ Document Conventions on page xvii
■ Related Juniper Networks Documentation on page xviii
■ Documentation Feedback on page xxi
■ Requesting Technical Support on page xxi
Objectives
This guide contains an overview, basic instructions, and specifications for J2320,
J2350, J4350, and J6350 Services Routers. It explains how to prepare your site for
installation, unpack and install a Services Router and its components, power on the
router, install licenses, and establish basic connectivity.
J-series Services Router operations are controlled by the JUNOS software. You direct
the JUNOS software through either a Web browser or a command-line interface (CLI).
NOTE: This guide documents Release 9.2 of the JUNOS software. For additional
information about J-series Services Routers—either corrections to or omissions from
this guide—see the J-series Services Router Release Notes at
http://www.juniper.net .
Audience
This guide is designed for anyone who installs and sets up a J-series Services Router
or prepares a site for Services Router installation. The guide is intended for the
following audiences:
■ Customers with technical knowledge of and experience with networks and the
Internet
■ Network administrators who install, configure, and manage Internet routers but
are unfamiliar with the JUNOS software
Objectives ■ xv