John Deere SURFACE WATER PRO OMPFP11362 - Manual (Page 19)

Machine and Implement Setup
JS56696,00009D6 ­19­11MAY11­4/4
JS56696,00009D7 ­19­19MAY11­1/1
NOTE: If the physical width is less than the implement
(working) width, a message will appear as a
reminder that this is not usually correct (A 16R30
planter is physically wider than its 12.2 m (40 ft)
working width). An example where the working
width is wider than the physical width is a dry
fertilizer spreader—it spreads much farther than
the physical width of the buggy.
Confirm Configuration—The
physical width is
smaller than the
implement width which
may not allow detection
of all intersections
with impassable
boundaries.
PC12865
—UN—16SEP10
Confirm Configuration
Machine GPS Receiver Setup
Select MENU softkey >> STARFIRE 3000 MACHINE
softkey >> SETUP tab.
This screen allows access to StarFire 3000 setup pages.
See the StarFire 3000 operator’s manual to set up the
receiver for the machine.
NOTE: To ensure highest accuracy, do not operate
Surface Water Pro and Pro Plus outside a 1.6 km
(ONE MILE) radius of the Base Station.
If your RTK kit came with a 7.5 cm (3 in.) antenna
extension it is suggested to discard the extension
and use either the 23 or 30 cm (9 or 12 in.)
one­peice antenna. Use of the 7.5 cm (3 in.)
extension on the implement receiver could result
in the loss of the antenna due severe vibration
created by some implements.
PC13406
—UN—20APR1
1
StarFire 3000 Receiver
PC8663 —UN—05AUG05
MENU Softkey
PC12042 —UN—08MAY09
StarFire 3000 Machine Softkey
PC10857BR —UN—15JUL08
Setup tab
15­11 061611
PN=19