John Deere SURFACE WATER PRO OMPFP11362 - Manual (Page 36)

Ditch
JS56696,00009E3 ­19­16MAY11­1/1
Continued on next page JS56696,00009E4 ­19­18MAY11­1/2
Recorded Path for Ditching
PC10857DW
—UN—07OCT08
A—Path Recorded by Tractor for
AutoTrac
B—Path Recorded by Implement
for Ditch Track
C—Start of recorded Tractor Path
D—End of recorded Tractor Path E—Start of recorded Implement
Path
F— End of recorded Implement
Path
If an implement receiver is used to record elevation data
for ditch track, the resulting path differs from the AutoTrac
path. AutoTrac is always based off of the receiver on the
tractor. AutoTrac and Ditch Track paths have different
starting and stopping points. Although the tractor may be driving on the Ditch path, ditching guidance does not
become active until the implement receiver is on the cut
line path. The cut line is updated when the implement
receiver is over the recorded ditch.
Record Ditch Track
Select MENU softkey >> GREENSTAR 3 PRO softkey
>> SURFACE WATER PRO softkey >> DITCH tab >>
OVERHEAD VIEW button.
PC8663 —UN—05AUG05
MENU softkey
PC12685 —UN—14JUL10
GREENSTAR 3 PRO softkey
PC10379 —UN—14OCT07
SURFACE WATER PRO softkey
PC10857BS —UN—15JUL08
Ditch tab
40­4 061611
PN=36