JVC LST0728-001C - Manual (Page 117)

109
Ⅵ Setting Items and Buttons
Memo :
● NAS is a dedicated file server that is connected to the network.
In the case of this unit, you can specify NAS as a drive for
archiving data.
● For details on the NAS drive settings, refer to the [Details] item
under [HDD Utility]. (A Page 117)
Note :
● When other operations (e.g., startup of Live Viewing) overlap
with the startup of the archiving process, up to 3 seconds of the
recording may be lost.
● Set the interval of performing achieving to more than 1 hour.
● Do not specify the same NAS drive for multiple cameras. If there
is an insufficient number of NAS drives to be specified for each
camera, divide the NAS drive into multiple partitions, and
configure each of them as a separate NAS drive.
● Changing the [Automatic path selection] settings may cause
playback of data prior to the change to fail.
Precautions when Changing NAS Archive
Settings
When NAS is specified as the archive destination, the path that is
displayed on the “Select Directory” screen may not coincide with the
preset value.
Precautions when Changing Archive
Settings
Do not specify the C, L, or M drive as the archive destination. Doing
so may cause the system to malfunction.
Item Description
J Time to add For specifying the archiving time.
Add Adds the archiving time specified in the
[Time to add] field to the [[Daily archiving
times] K list.
Delete Removes a selected archiving time from the
list.
K Daily
archiving
times Lists specified archiving times. Archiving
takes place everyday at the specified time.
Save to Button
[Archive Setup] Screen
(h:/is specified as the archive
destination)
[Select Directory] Screen
(C drive is displayed)