JVC LST0728-001C - Manual (Page 126)

118
Applications
User Administration
This section describes procedures to configure user accounts and
rights.
Ⅵ User Settings
After the [User Administration] screen appears, you are able to
define individual users and their passwords. There are two ways to
add new users.
● Add Basic User...:
You can create a dedicated user account for the
surveillance system through authentication of the user
name and password.
● Add Windows User...:
Note :
● Do not select this option. For details, consult your system
administrator.
● If the [Host Name] in [OS Setting] has been changed, enter
AAdministratorB in [Enter the object names to select] on the
[Serect Users or Groups] screen, and click the [Advanced...]
button. Next, click the [OK] button.
● Windows users need to define a Windows user for each host
name specified in [Host Name] in [OS Setting]. As the user’s
host name is not displayed on the [User Administration] screen,
it is recommended that you delete the Windows user and add
again if you have changed the host name.
Memo :
● To edit a preset user name or password, select the user to edit
from the [Current isers/groups] list, and click the [Change
password...] button.
● To delete a preset user, select the user from the [Current isers/
groups] list, and click the [Delete] button. The user that has been
deleted from the list is no longer able to login to NVR Viewer.
● After adding a new user in [Add Basic User...], a small square
appears to the top left of the icon on the [User Administration]
screen. You can distinguish between [Add Basic User...] and
[Add Windows User...] using this mark when the same user
name is registered with both.
Ⅵ Defining User Rights
1
Select [Restrict user access] in the [User
Administration] section
2
Click [User Access...]
Distribution Settings
(Details)
vr-n1600
1
2