Unit setting 2, Main menu list (continued), Applications unit setting 2 – JVC LST0728-001C User Manual
Page 80
72
Applications
Unit Setting 2
Main Menu List (continued)
C
D
A
B
Item
Preset Values
Description
Reference
Page
A
HDD meter
Display at startup
Select check box
● Do not select check box
Select this check box to display the HDD meter when the
system starts up.
● For details on HDD meter, refer to [HDD Meter] (A Page 133).
B
Clock setting
Display at startup
Select check box
● Do not select check box
Select this check box to display the clock when the system
starts up.
Display at date
Select check box
● Do not select check box
Select this check box to display the date on the clock.
Display at second
Select check box
● Do not select check box
Select this check box to display the seconds on the clock.
C
SNMP setting
Enable of SNMP
Select check box
● Do not select check box
Select this check box to enable the SNMP function.
Enable of TRAP
Select check box
● Do not select check box
Select this check box to enable the TRAP function.
SNMP manager’s
address
^
Specify the IP address of the SNMP manager. (IP address)
Community name
^
Specify the SNMP community name. (1 to 32 characters.
Alphanumeric characters only.)
Confirmation interval
of alarm
10 seconds
Specify the interval to monitor the alarm.
(10 to 9999 seconds)
Confirmation interval
of CPU usage
10 seconds
Specify the interval to monitor CPU usage.
(10 to 9999 seconds)
Confirmation interval
of D-drive
60 seconds
Specify the interval to monitor the writing rate to the D drive.
(30 to 9999 seconds)
Confirmation interval
of NVR Viewer
10 seconds
Specify the interval to monitor the startup status of NVR viewer.
(10 to 9999 seconds)
Confirmation interval
of camera
60 seconds
Specify the interval to monitor connection status of the camera.
(60 to 9999 seconds)
Copy extension MIB onto the flash memory
Copy the MIB extension information into a flash memory device.
● For details on SNMP settings, refer to [Setting SNMP]
D
OK/Cancel
^
OK: Exits after entries and the selected content are configured
to the system.
Cancel: Exits without saving all entries and selected settings.
^