JVC AV-32R370KE - Manual (Page 33)

Using the TV’s menu
33
$95.(  /&7$8  (1*/,6+
3 Press the number buttons to enter
the remaining CH number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
• The CH number is a number given to
each broadcast frequency that carries a
TV channel. If the TV cannot detect
the TV channel corresponding to the
broadcast frequency indicated by the
CH number, a “no-signal” picture
appears.
DELETE
1 Press the 6 buttons to choose a
TV channel
Every time you press the 6 buttons, the
programme number (PR) changes and the
picture of the TV channel stored in the
programme number (PR) appears on the
screen.
2 Press the yellow button to delete
the TV channel
The TV channel is deleted from the
programme numbers (PR) list.
MANUAL
1 Press the 6 buttons to choose a
programme number (PR) for a new
TV channel
2 Press the blue button to activate
the MANUAL function
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the green or red button to
search for a TV channel
Scanning stops when the TV finds a TV
channel. Then the TV channel is
displayed.
4 Press the green or red button
repeatedly until the TV channel you
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
5 Press the a button and register
the TV channel to a programme
number (PR)
The normal EDIT menu is resumed.
AV-32&28R370KE.fm Page 33 Thursday, February 6, 2003 10:38 AM